!...Tutorials Hut...!

[ץאz]

• How long it takes greatly depends on your computer specs. I have a AMD Athlon 64 X2 Dual Core 4400+ and it took 2 Hours 20 Mins to rip Con Air and this is about typical for my PC.

• Various things will pop up (but in minimised state) during the encoding. You can just ignore these, but do not close them. You can check the progress of the rip by browsing through the log window. Once it is finished it will say Job finished along with the total time it took at the bottom of the log.

• For a copy of the AutoGK log from my Con Air rip, see here (6KB):

http://rapidshare.com/files/11345081/CON_AIR_D1A_agk.log 
http://www.megaupload.com/?d=5CS7B0R2 
http://d01.megashares.com/?d01=2e6d5b1

• AutoGK will automatically split the 1400MB movie into two 700MB files. I would also recommend giving them a meaningful name, in this case I called the first CD:

C0n.Air.1997.AC3.6CH.DVDRip.XviD_CD1.avi

and the second CD:

C0n.Air.1997.AC3.6CH.DVDRip.XviD_CD2.avi


• By this naming convention, a person can see the name of the movie (Con Air), when it was made (1997), the audio type (AC3) and the number of channels (6 CH, for those with surround sound), the quality/source (in this case, a dvd rip) as well as what codec was used to encoded it (XviD) and of course what CD it is (1 or 2).

You may notice the file name is C0n.Air instead of Con.Air. This a completely one-off because "con." is actually a reserved DOS word.

• Before continuing, I would recommend you open the movie and watch a few random parts for a couple of minutes, just to ensure the rip went according to plan and that no audio is out of sync. Testing it now could save a lot of time later down the track.

[ץאz]

Section 3: Taking screen captures and other info for the post


• Ok, everyone knows that a good post is post that contains screen caps and info. To take the screenies, we'll use a program called Image Grabber II.

• First open up Image Grabber II, go to File then Open File... and navigate to the first CD and click Open.

• You can manually take pics by sliding the slider and click the Manual Screen caps button. However to save time, click the monitor button and a box will appear asking for the Number of Frames to Extract. I usually take 15 so enter 15 and click OK.




• It will automatically capture frames and display them down the bottom. You can remove any by right clicking on them and selecting Delete. However it's auto selection is usually fine for me.

• Now select File in the menu and click Save File. You can play around with any settings like fonts and colours etc but the default is fine for me. Click Save and save the screen cap into a folder.




Repeat for the second CD. There is now a series of miniature pics of the movie for downloader’s to have a look at which is also accompanied with the movie name, file size, resolution and duration all in the one image.




• I also like to include 1:1 screen caps, as in if the movie resolution is 672x288 then so will the pics size. I usually include 2-5 and do this so downloader’s can judge the quality and resolution.

• To get these you do the same as above but instead of clicking Save File..., you click Save Multiple... on the file menu and specify a folder to save all the pics to. Now each pic will be an individual image in the correct movie size.



• You can then host the pics. I use tinypic because it's nice and easy and hassle free:

http://www.tinypic.com/

.

• Now to get the technical info about the movie. With AVI2Clipboard installed it is simply a matter of right clicking the movie and selecting AVI2Clipboard on the menu.

• You can do this one of two ways. First is click Save to Clipboard (Normal) and it will copy the info to the clipboard as text so you can paste it into your post.

• Second is instead click View AVI Information then press Print Screen so you can take a screen shot of the info (and paste it in ms paint or something and save it as a .jpg) and put it into the post as an image. I usually display this info as image rather than text for the simple reason that I think it looks neater.

• Repeat for the second CD.

[ץאz]

Section Four: Splitting the movie into chunks ready for uploading

• You're now already to go, you just have to split and upload it. Now, one the most common file hosting sites in the world is rapidshare.com and they have a limit of 100MB per file so the movies have to be split. To do this, we will use WinRar

If you're thinking of splitting a file with HJSplit or similar, DONT! Programs like those do not provide any sort of error checking, crc's or error repairing and they do not perform diagnostics or testing. WinRar does. If you download the split parts of a movie and they have been split with HJSplit and one or more parts have become corrupt during the download process (which is not uncommon), there is very little you can do except re-download all the parts again because you don't know what the matter is.

With WinRar you at least have options that can salvage a perfectly working video from corrupt files or at least tell you exactly which file is the problem so you only have to download that part again.

• First step is to open WinRar. Go to Tools at the top menu and select Wizard.










• Once it's finished, repeat the same for the second CD and you should end up with 16 files.



• I would also recommend at this point the you extract the movie from the parts to test it and make sure nothing went wrong with the splitting or password. This will save you a lot of time if you find out something did go wrong after uploading all the parts. Now it's just a matter of uploading the files and you're done.

[ץאz]

Section Five: Uploading to rapidshare.com via Rapid Uploader

• Now obviously for this section, you have to have a rapidshare premium account. First step is to open Rapid Uploader. It's a stand alone program that will create it's own history and settings files. Because of this, it is recommended you place it in it's own folder.

• Click the Settings tab then the Login tab and under Login-Type check Premium Account (or Collector's Account if that's what you have).

• Now enter your rapidshare account user name and password before clicking the Click here to finalize this option.





• You can of course play around with the other Rapid Uploader options and settings to find what best suits you. Once all the files have been uploader, you are now ready to post.



You can find the final result

As I've said previously, this is just a beginner’s guide. Once you do a few rips and gain a bit more confidence with not only the software but the entire process, you can start playing around with a few settings and options here and there. Sometimes there is a lot of trial and error involved but doing practice rips will let you see how the results turn out.

If some rips don't turn out how you expected, don't become discouraged and keep trying and take satisfaction in the fact someone somewhere in the world might one day download and watch what you have put your time and effort into.

Again, as I said at the start, this is the process I take BUT this whole process is just one of many ways that can be taken to achieve the same end result. If you're confident and patient enough try other types of software and processes for yourself and see what works best for you.

[ץאz]

Originally Posted by Wolveriŋe™

ela ela

Tikak diga wadie ...!
1 post ekakata danna denne nah ne....!

[ץאz]

Not able to open drives on hard disk by double click


Trouble:

Sometimes it happens in windows XP that you are not able to open drives on your hard disk. When you double clicking on the drives icons or right click on the drive>>explore in My computer ,the drive does not open.

This problem is generally caused by most of the viruses which infect windows XP system. They block or restrict your access to any of the drives.

ix:

Normally when a virus infects a windows system which causes a drive opening problem, it automatically creates a file named autorun.inf in the root directory of each drive.

This autorun.inf file is a read only ,hidden and a system file and the folder option is also disabled by the virus. This is deliberately done by the virus in order to protect itself. autorun.inf initiates all the activities that the virus performs when you try to open any drive.

You have to just delete this file and restart your system to correct this problem.

1. Open Start>>Run and type cmd and press enter. This will open a command prompt window. On this command prompt window type the following steps.

2. type cd\

3. type attrib -r -h -s autorun.inf

4. type del autorun.inf

5. now type d: and press enter for d: drive partition. Now repeat steps 3 and 4. Similarly repeat step 5 for all your hard disk partition.

Restart your system and your trouble will be fixed.

[ץאz]

VTC C++ Video Tutorials




Author: Arthur L. Lee | ISBN: 1930519079 | Duration: 5 hrs / 43 lessons | Video Format: .mov (QuickTime Movie) | Compatibility: Win Vista, XP, 2000, Mac OS X, Linux

C Plus Plus (C++) is a programming language that is both procedure-oriented and object-oriented. In VTC’s tutorial, Professor Arthur Lee will explain the environment of C++, then guide you into writing equations, creating functions and output, looping, and much more.
* Quick and easy way to learn C++ through a series of movies.
* No expensive classroom training courses.
* No boring hard to follow books to read.
* Learn from your own desk at a pace that suits you.
* High quality affordable training that is easy to use and follow.
* Use our unique training method, it makes learning easy no matter what your learning style.

Contents:

Intro to C++ & the Environment
* Intro to C/C++ (02:33)
* The C++ Environment (07:02)
* Completing the Sample Program (06:00)
* Compiling & Executing Programs (04:35)
* Common errors (04:53)
* Saving & Exiting; other errors (02:55)

Variables,Constants, & Math Statements
* Variables (04:09)
* Data Types (04:15)
* Declaration statements & Initializing variables (05:03)
* Declaring Constants (02:12)
* Assignment Statements vs. Prompting for user input (04:34)

The String Data Type; Equations
* Character vs. String data (04:12)
* Using the getline function and the strcpy function (04:30)
* Writing equations and Type casting (04:32)
* Putting it all Together: Demo of complete program (03:34)
* Debugging Demo (04:28)

Programmer-Defined Functions
* Creating Programmer-Defined Functions (04:28)
* Details of Function prototypes, definition and the calling statement (04:10)
* Scope & Lifetime issues; Passing data with functions (06:10)
* Passing Variables by Value and by Reference (05:15)
* Functions that Return Values (04:47)
* Debugging Demo (02:44)

Creating Output (formatting and creating files)
* Stream Manipulators (formatting output) (03:56)
* The Output File Stream: Accessing the Output File (05:40)
* Demo Program (Demo 12) to Illustrate (03:17)
* Debugging Demo (04:03)

Using the if Statement
* Syntax of a Conditional Statement (03:39)
* Relational Operators (02:11)
* Executing if Logic (one statement vs. block) (04:50)
* Assignment Operator vs. Equality Operator (02:19)
* Logical Operators (symbols for: and, or, not) (05:36)

Other Functions; Nested if Statements
* Converting to Upper/Lower Case (04:50)
* Comparing Strings (strcmp and stricmp functions) (04:43)
* The Strlen Function (02:32)
* Nested if Statement Structure (03:33)
* Demo of Complete Program (04:00)

Looping
* Overview of the Looping Structures (07:08)
* Demo of the While Loop (03:23)
* Demo of the Do-While Loop (05:57)
* Demo of the For Loop (03:25)
* Counters and Accumulators in Loops (01:27)
* Demo of Complete Program (05:41)
* Increment/Decrement Operator (what does C++ mean?)* (02:38)

http://rapidshare.com/files/95883341/VTC_C___Video_Tutorial.rar

[DarkLord]

ela ela



keep it up

[ץאz]

Ur welcome.............!

[ץאz]

MAKE YOUR OWN SUBTITLE

1. First, choose a folder (or open a new one) where you’ll make subtitles. You don’t need much space. Just size of the movie plus 50-60 Kb. Now, move your movie in that folder, and than right-click in free space. Choose NEW --> TEXT DOCUMENT. Rename file, so that movie that you’re making subtitle for has the exactly same name.

2. Now open that text document (I’ll cal it SUBTITLE) and the movie that you are making the subtitle for (I’ll call it MOVIE) from BS PLAYER PRO. Change “time showing” to the frames. Now, write you subtitle. “How?”, you’re asking. Well, simple! If the voice that you want to write in your subtitle begins at the 123rd frame, and finishes at 198th frame, and the voice that you want to write in the subtitle is “IT’S EASY TO MAKE SUBTITLES”, write like this:

{123}{198}It’s easy to make subtitles

Isn’t it easy?

3. You can make text to:
a) Change style (bold, italic and underline)
b) Change color
c) Change font
d) Change size

To change style, type {y:i} (italic), {y:b} (bold) and {y:u} (underline)

To change color, type {c:$ffffff} (this code is for white or black color, I don’t know). You need to know which code is which code. Color contains numbers and Fs. Don’t foregot to type $ before any code.

To change font, type {f:Arial}. Each font must be typed the same as the real name.

To change size, type {s:12}.

When yopu finish making your subtitle, play it with Media Player Classic for better view of subtitles, because Bs Player PRO can't show letters as Ž, Š, Đ, Č, Ć.

HAVE FUN MAKING SUBTITLES!!!

Even I don’t know everything about subtitles.